What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 02:03

The MOV will conduct when the voltage exceeds 50% of line voltage.
what exactly is a ‘surge’ protector?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The other is “what does a “fuse” do?”
These are simplified answers to the original question, and does not change anything I wrote above.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is your review of X-Men '97 season 1?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
An AC voltage/ current source, and an ac inductive load.
but this device (an Inductor) … impedes the rapid changes in the current.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
What does a fuse do?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Barnstars:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Who is the most annoying character in the Office?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There are three different concepts here that are getting confused.
(Dc diagram shown, AC is similar).
What do men like to be given for their birthday?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It also is a device that limits the change in current flow.
[old diagram got deleted by accident]
Why is Roblox so laggy it’s unplayable? My computer is fine and the internet is great.
At one ohm, the resistor has a maximum of 1 watt power.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But… the neutral is now “floating” because of the 1 ohm resistance.
Why do I feel like something bad is going to happen to me?
eight
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Apple’s Music app in iOS 26 gains my favorite feature from the Mac - 9to5Mac
2024–10–10[John johnson John Johnson ]
First Sentence:
This one hit behind the barn.
Is it possible to become homeless after being released from jail or prison in the United States?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Here is a simplified AC power diagram.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Why do White people love dogs more than humans?
the problem then depends on "how fast does the fuse operate?".
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
In schematic diagrams this is the symbol for a fuse:
This device then solves the entire problem.
This is 'the assistant's answer'
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
One
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These devices are installed between the “hot” and “neutral” and protective ground.
I post the exact comment here.
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is where the MOV conducts again, and dissipated the energy.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Upvotes:
Edit 2024–10.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There are two important concepts here.
The bolt then partially travels down the line to your home.
nine
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
a photo is worth a thousand words.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
but I think this circuit , shows a few more pieces.
so, what happens?
The third is lightning and “how it gets conducted into a home.”
One is “what exactly is in a ‘surge protector’ ? ”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes Rainy Season and Lightning.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then asserts :
But it can get overloaded, and no longer works.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
[image of Common-mode choke]
At least they know the answer if they wanted it.
It seems Mohan does not understand the difference between a comment and an Answer.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Now when you have a certain ac resistance, then a current flows in a loop.
A circuit breaker is similar, but is resettable.
A fuse is a non-resetable over current circuit protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What is lightning?